当代法国风景园林行业中的女性

女性一直在风景园林行业发展中占有一席之地。欧洲以及法国的主要风景园林协会、联盟,都有女性积极参与,虽然并未官居要职,但数量上占有较大比例。对法国风景园林教育研究、设计实践的发展,女性都起到了重要的推动作用。对具有代表性的法国女风景园林师做了梳理与介绍,总结法国当代风景园林行业内女性的发展状况特征。未来,女性将在风景园林领域内持续发挥重要作用。     

Gate‐Controlled Energy Barrier at a Graphene/Molecular Semiconductor Junction

The formation of an energy‐barrier at a metal/molecular semiconductor junction is a universal phenomenon which limits the performance of many molecular semiconductor‐based electronic devices, from field‐effect transistors to light‐emitting diodes. In general, a specific metal/molecular semiconductor combination of materials leads to a fixed energy‐barrier. However, in this work, a graphene/C₆₀ vertical field‐effect transistor is presented in which control of the interfacial energy‐barrier is demonstrated, such that the junction switches from a highly rectifying diode at negative gate voltages to a highly conductive nonrectifying behavior at positive gate voltages and at room temperature. From the experimental data, an energy‐barrier modulation of up to 660 meV, a transconductance of up to five orders of magnitude, and a gate‐modulated photocurrent are extracted. The ability to tune the graphene/molecular semiconductor energy‐barrier provides a promising route toward novel, high performance molecular devices.     

Magnetic resonance image denoising using nonlocal maximum likelihood paradigm in DCT‐framework

The data acquired by magnetic resonance (MR) imaging system are inherently degraded by noise that has its origin in the thermal Brownian motion of electrons. Denoising can enhance the quality (by improving the SNR) of the acquired MR image, which is important for both visual analysis and other post processing operations. Recent works on maximum likelihood (ML) based denoising shows that ML methods are very effective in denoising MR images and has an edge over the other state‐of‐the‐art methods for MRI denoising. Among the ML based approaches, the Nonlocal maximum likelihood (NLML) method is commonly used. In the conventional NLML method, the samples for the ML estimation of the unknown true pixel are chosen in a nonlocal fashion based on the intensity similarity of the pixel neighborhoods. Euclidean distance is generally used to measure this similarity. It has been recently shown that computing similarity measure is more robust in discrete cosine transform (DCT) subspace, compared with Euclidean image subspace. Motivated by this observation, we integrated DCT into NLML to produce an improved MRI filtration process. Other than improving the SNR, the time complexity of the conventional NLML can also be significantly reduced through the proposed approach. On synthetic MR brain image, an average improvement of 5% in PSNR and 86%reduction in execution time is achieved with a search window size of 91 × 91 after incorporating the improvements in the existing NLML method. On an experimental kiwi fruit image an improvement of 10% in PSNR is achieved. We did experiments on both simulated and real data sets to validate and to demonstrate the effectiveness of the proposed method. © 2015 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 25, 256–264, 2015     

Completion of designing and manufacturing of the coil support structure of W7-X

In February 2000, the project called coil support structure for the Wendelstein 7-X fusion machine was started. Since October 2009 the full production of this big (80 tons) and complex component is now completed and delivered at IPP Greifswald. The W7-X coil system consists of 20 planar and 50 non-planar coils. They are supported by a pentagonal 10 m diameter, 2.5 m high called coil support structure (CSS). The CSS is divided into five modules and each module consists of two equal half modules around the radial axis. Currently, the five modules were successfully assembled with the coils meeting the tight manufacturing tolerances. Designing, structural calculation, raw material procurement, welding & soldering technologies, milling, drilling, accurate machining, helium cooling pipe forming, laser metrology, ultra sonic cleaning and vacuum test are some of the key points used all along this successful manufacturing process. The lessons learned in the large scale production of this difficult kind of support structure will be presented as relevant experience for the realization of similar systems for future fusion devices, such as ITER.     

High glass transition temperature polyester coatings for the protection of stones

Copolymers of lactic acid with mandelic or salicylic acid were synthetized through ring‐opening polymerization (ROP) and tested as protective coatings for stones. Most notably, glass transition temperature (T_g), hydrophobicity, and UV barrier properties were increased, making these materials more suitable as protective coating for outdoor stones than poly(lactic acid). A T_g of 76°C was obtained for the alternating copolymer lactic acid/mandelic acid and it was considerably higher than the one of poly(lactic acid) with similar molecular weight (50–55°C). Furthermore, the introduction of a perfluorinated moiety as chain‐end group, using a perfluoro alcohol as initiator of the ROP process, allowed to increase the hydrophobicity and stability of the new coatings. These polymers showed a good protective efficiency when applied on marble stones and preliminary stability tests under solar light showed low degradation, good stability to photo‐oxidative conditions, and negligible color changes after an aging time of 1000 h. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42323.     

Polycarbonate‐based composites reinforced by in situ polytetrafluoroethylene fibrillation: Preparation,thermal and rheological behavior

Fibrillar reinforced composites of polytetrafluoroethylene (PTFE) and polycarbonate (PC) were prepared by in situ fibrillation of PTFE into PC matrix using twin screw extruder. Different samples were obtained by varying the relative ratio between PC and PTFE. The rheological properties of the PC/PTFE composites were found to depend on concentration of the PTFE fibrils. The melt strength analysis in nonisothermal conditions was also studied. The increase in force and decrease in drawability with increasing the PTFE content are associated with the PTFE fibrils formed in situ during the thermomechanical process in twin screw extruder. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42401.     

Validation of a Methodology for Cure Process Optimization of Thick Composite Laminates

The cure degree must be as uniform as possible during the manufacture cycle of polymer–matrix composite laminate to obtain parts without defects. Thermal cycle recommended by technical sheet is usually suitable for thin components, so its redesign is necessary to solve unconformities for thick laminate parts, which usually show these problems. In this study, a methodology to optimize the cure cycle of a thick composite laminate, presented in previous studies, has been validated by a more reliable direct method based on dielectrical analysis through the use of an interdigital sensor capable to measure the local cure degree trend.     

Context‐aware Android applications through transportation mode detection techniques

In this paper, we study the problem of how to detect the current transportation mode of the user from the smartphone sensors data, because this issue is considered crucial for the deployment of a multitude of mobility‐aware systems, ranging from trace collectors to health monitoring and urban sensing systems. Although some feasibility studies have been performed in the literature, most of the proposed systems rely on the utilization of the GPS and on computational expensive algorithms that do not take into account the limited resources of mobile phones. On the opposite, this paper focuses on the design and implementation of a feasible and efficient detection system that takes into account both the issues of accuracy of classification and of energy consumption. To this purpose, we propose the utilization of embedded sensor data (accelerometer/gyroscope) with a novel meta‐classifier based on a cascading technique, and we show that our combined approach can provide similar performance than a GPS‐based classifier, but introducing also the possibility to control the computational load based on requested confidence. We describe the implementation of the proposed system into an Android framework that can be leveraged by third‐part mobile applications to access context‐aware information in a transparent way. Copyright © 2016 John Wiley & Sons, Ltd.     

给电压比较器添加滞后作用

正正反馈是围绕比较器来分配滞后作用的典型方法,前提是比较器的输出与非逆变输入之间具有电阻路径。正反馈形成两个具有(或呈现)固定值的阈值电压。另外,它们还取决于比较器输出级的饱     

Comparison of energy intake prediction algorithms for systems powered by photovoltaic harvesters

Small size photovoltaic modules can harvest enough energy to power many personal devices and wireless sensor nodes. The prediction of solar energy intake is possible thanks to the periodical availability of the sunlight and its cyclic behavior. Thus, smart and innovative power management strategies can take advantage from intake prediction algorithms to optimize the energy usage by keeping the system in low power state as long as possible. On the other hand, very accurate predictions need time and energy because of complex calculations, thus an algorithm that can provide the optimal trade-off between computational effort and accuracy is a breakthrough for systems with tight power constraints. In this paper we introduce an innovative, efficient and reliable solar prediction algorithm, the weather conditioned moving average (WCMA). The algorithm has been further enhanced to increase performance using a phase displacement regulator (PDR) which reduces the average error to less than 9.2% at a minimum energy cost. The proposed new algorithm compares favorably with several competing approaches.